Steel Body Steel Frame Dump Trailers
Warren Trailers Model : WRDT-SS Specifications
WRDT-SS
The steel body and frame of the WRDT-SS model trailer is precision engineered, fabricated, and welded to provide years of trouble free service.
SS model trailers can be specified with numerous optional features to meet your exact requirements; hi-tensile steel, various tailgate designs, special lighting and paint are just a
few of these items. Lengths are available in 22 to 38 ft. and can be equipped with multiple axles to achieve your weight and bridge law compliance goals.
The Warren steel dump trailer is engineered to insure maximum stability. The full depth frame cross-members help prevent torsional twisting when dumping and even when turning.
Standard Body Features |
|
---|---|
Length | 22’ to 38’ |
Capacity | 20 to 50 cu. yards |
Width | 96” outside; 87” inside |
Floor Material | 3/16” High strength steel |
Cross Members | 4” – 5.4#/ft. structural channels |
Longitudinal | 6” – 12.5#/ft structural I-beam |
Side Material | 10ga. High strength steel |
Top Rail | 4” X 4” Structural wall square tubing |
Bottom Rail | 4” X 4” Square tubing –structural wall square tubing w/ welded in dirt shedders |
Side Braces | Boxed 6” wide 10ga. |
Tailgate | 3/16” 9-panel bracing, airlock |
Paint | Several standard colors / optional colors available |
Standard Steel Chassis Frame |
|
---|---|
Suspension | Hutchens, w/multi-leaf, spring |
Axles | 25,000 lb. capacity, 5” round w/auto slack adjusters |
Brakes | 16 1/2” X 7” – ‘S’ cam air, quick change non asbestos w/30/30 chambers |
Hubs/Drums | Outboard mount 10 stud, steel, hub piloted |
Wheels | 8.25 X 22.5 or 24.5 steel disc |
Tires | 11R-22.5 or 11R-24.5 |
Lights | LED w/sealed wire harness in accordance w/FMVSS 108 |
Landing Gear | Holland drop legs |
Frame Rails | Web 3/16” X length of trailer, A-50 steel, top flange 1/2” X 4” X 10’ steel Bottom flange 3/4” X 4” X 10’ neck area, 1/2” X 4” balance of trailer length |
Frame | Fabricated. Full depth, 3/16” cross-members (1/4” over suspension) |
King Pin Plate | 3/8” steel, 2” SAE kingpin |
ABS | 2S/1M |
Mud flaps | 1/2” H.D. rubber – plus 1/2” center chassis flap |
Options |
Tarp Systems |
Selection of Suspensions |
Aluminum Wheels |
Various Lengths & Side Heights Available |
Water Tight Tailgate |
Bed Liners |
Leave A Comment
You must be logged in to post a comment.